⎝⎛多人牛牛⎞⎠

  1. English
  2. Simplified Chinese

News Center

    Ultrasonic machine | Parameters of 4200W desktop ultrasonic welding machine

    date: 2020-01-13 Reading: 54

     


     

    15KHZ Frequency: 15KHZ

    4200W Power: 4200W

    220V Voltage: 220V

    300mm Welding area: 300mm

    Machine function:

    数字电路:协和顺应市场发展,对现有的超声波设备进行了更新换代的升级。 1. Digital circuit: Concord has responded to market development, and upgraded the existing ultrasonic equipment. The traditional ultrasonic welding machine generally uses an analog circuit system. After the upgrade, it uses a digital circuit system that only foreign high-end ultrasonic equipment has.

    振幅可调:焊接过程中可以随时调整振幅的大小,从 20% 100% ,精确度为 1% 2. Adjustable amplitude: The amplitude can be adjusted at any time during the welding process, from 20% to 100% , with an accuracy of 1% . It can effectively reduce the bad products such as puncture and scald, and the large and small plastic parts can be perfectly welded.

    能量模式:以累计的能量达到设定值作为焊接终止条件,从而能减少因气压、电压等因素的波动而引起的误差,达到提高焊接质量的效果。 3. Energy mode: The accumulated energy reaches the set value as the welding termination condition, which can reduce errors caused by fluctuations in factors such as air pressure and voltage, and achieve the effect of improving welding quality.

    调模模式:该模式用于方便调试模具使用。 4. Mold adjustment mode: This mode is used to facilitate the debugging of mold use.

    时间模式:是最成熟、最常见的焊接模式,以输出时间达到设定值为终止条件,能完成绝大部分的焊接任务。 5. Time mode: It is the most mature and common welding mode. It can finish most welding tasks when the output time reaches the set value.

    塑胶焊接设备自动追频:超声波设备在工作过程中,由于焊头因温度变化等原因导致谐振频率偏移,需要尽快寻找到即时的谐振频率驱动超声波继续工作,这项是数字超声波很重要的功能,实现的完美程度决定超声波的品质。 6. Automatic frequency tracking of plastic welding equipment: During the operation of ultrasonic equipment, due to the temperature change of the welding head, the resonance frequency is shifted. It is necessary to find an immediate resonance frequency as soon as possible to drive the ultrasound to continue working. This is a very important digital ultrasound The function and the degree of perfection determine the quality of the ultrasound.

    开机自检:开机自检并作出相关提示,防范不良于未然,而且方便维修。 7. Power-on self-test: Turn on the power-on self-test and make relevant prompts to prevent defects before they occur and facilitate maintenance.

    智能保护:具有功率过载、设备温度过高、频率偏差过大、负载连接线不牢、焊头损坏、电流过高等保护。 8. Intelligent protection: with power overload, equipment temperature is too high, frequency deviation is too large, load connection lines are not strong, welding head damage, high current and other protection.

    软启动:软启动为在功率上升、发出超声波时,如果压住焊接工件突然以最大功率输出,将会造成很大的电流冲击,容易损坏设备,且容易出现过载现象,一般需要适量减小功率后启动再快速爬升到所需功率以避免冲击。 9. Soft start: When the power rises and emits ultrasonic waves, if the welding workpiece is pressed at the maximum power output suddenly, it will cause a large current impact, it is easy to damage the equipment, and it is prone to overload. Generally it needs to reduce Start after low power and climb quickly to the required power to avoid shock.

    焊接工件震落:如果焊接后,焊接工件会随着焊头一起被提起,那么您需要这个功能将粘在焊头上的工件震落。 10. Welding workpiece shakes down: If the welding workpiece will be lifted along with the welding head after welding, then you need this function to shake off the workpiece stuck to the welding head.

     

    大功率超声波焊接机,能够胜任大部分高难度的焊接任务。 The 4200W high-power ultrasonic welding machine is capable of performing most difficult welding tasks. PA PP ,如汽车配件、医疗行业。 Particularly suitable for refractory materials such as nylon PA , PP , such as auto parts, medical industry.

    手机电玩平台 炸金花 七乐彩 欢乐拼三张